Quick Answer: How Long After Bleaching Well Can I Shower?

How often should you chlorinate your well?

every 3 to 5 yearsHomeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem..

How do you sanitize a deep well?

CLEAN: Remove all loose or foreign debris from the well house, spring house or storage tank. Turn the pump circuit breaker off and remove the well cap or cover. Then scrub the accessible interior surface with strong chlorine solu- tion (1/2 gallon chlorine bleach per 5 gallons clean water).

Is store brand bleach as good as Clorox?

Clorox is the most popular brand, but Clorox bleach is no better than generic brands — it just costs more. Generic cleaners, such as sanitizing wipes, work as well as the name brands. A name-brand cleaner with bleach costs about $0.14 an ounce compared to $0.08 an ounce for a generic brand found at the dollar store.

What do I do if I put too much bleach in my well?

Flush out the Clorox™ (or other brand) bleach solution: at the end of the standing period, operate the well pump (run the water) water until you can no longer smell the Clorox. Watch out: Do not run Clorox™ into the septic system – run water outside through an outside faucet or hose.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

Should you put Clorox in your well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

How long should you wait to use water after you chlorinate a well?

Use your reserves of fresh water for all purposes. Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

How long does it take for water to clear after shocking a well?

4 to 8 hoursIt will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.

Can I pour hydrogen peroxide in my well?

Hydrogen peroxide well water treatment for bacteria may not be as popular as other options for the treatment of bacteria-infested well water, but it is just as effective as, say, chlorination or shock treatment and, according to experts, is in fact safer.

How do I sanitize my bleach well?

Mix the bleach with the well water. Ⅰ Attach a hose to the nearest outside faucet and allow the water to run onto the ground for 1-2 minutes until you smell chlorine. Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.

How much bleach should I put down my well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

What happens if you drink water with too much chlorine?

Chlorine poisoning can cause symptoms throughout your body. Respiratory symptoms include coughing, difficulty breathing, and fluid inside the lungs. Digestive system symptoms include: burning in the mouth.

How long does it take for a well to clear up?

between 1 and 2 weeksAll in all, with all steps considered, it will typically take between 1 and 2 weeks to have a new well completely up and running. Of course, depending on several factors, it could take shorter or longer than this.

How long does it take to flush bleach from a well?

30 minutes to 24 hoursRun the water to flush the bleach solution out of the well. Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.