# Quick Answer: How Much Weight Can A 2×8 Ceiling Joist Hold?

## How much weight can attic joists support?

The joists are what support the weight.

An uninhabitable attic not designed for storage can handle a 10 pounds per square foot live load.

An uninhabitable attic designed for limited storage can handle 20 pounds per square foot live load..

## How far can you span a triple 2×10 beam?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet.

## How far are floor joists spaced?

16 inchesNormally, floor joists are spaced 16 inches apart on center. This means from the center of one upright joist to the center of the next. Given that 2x8s are actually 1-¾ inches wide, it works out to be 14-¼ inches between each joist. With some structures, floor joists are required to be 12 or 24 inches apart on center.

## Can my attic support a floor?

If the joists are larger, they might support attic flooring, but the only reliable way to know for sure is to have a structural engineer take a look at your attic support system. In some cases, even larger joists will not support a new living area, so it’s vital that an engineer take a look.

## How much weight will a ceiling joist hold?

50lb/sqftRegular garage ceiling joists of modern construction can generally support 50lb/sqft. If you have trusses or your joists are supporting more than just sheetrock or your garage is older this number could be significantly less. Remember to spread the load ACROSS your joists and not along them.

## How far can a 2×8 joist span without support?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists.

## How far can you span a 2×8?

12 feetIn general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists.

## How long can you span a 2×8 ceiling joist?

Sixteen-inch OC spacing of ceiling joists made from #2 southern pine allows for a maximum 13-½-inch span (length). This will support a room ceiling that is 10 feet long on one side — as in 10-foot by 15-foot or 10-foot by 17-foot rooms — which is a standard dimension for many rooms in residential construction.

## Are ceiling joists load bearing?

What are the load bearing capabilities of ceiling joists? Unless you have a flat roof, the ceiling joists and hanging beams are in place to support the ceiling only. They will not support a pitched roof load – this is the role of the strutting beams.

## Are two 2×6 stronger than a 2×8?

In bending, a joist composed of two 2×6’s (true dimension 1.5 inches x 5.5 inches) are slightly stronger than a single 2×8 true dimensions 1.5 inches by 7.25 inches.

## How far can a double 2×8 beam span?

When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. For instance, a double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.

## What is the maximum span for a 2×6 floor joist?

Max. Live Load 30 lbs/ft2 (1436 N/m2)Maximum Span (ft – in)Nominal Size (inches)Joist Spacing Center to Center (inches)Lumber Grade2 x 6249′ – 7″2 x 81215′ – 10″1614′ – 5″10 more rows

## How do you reinforce 2×6 ceiling joists?

Use six 10d nails with plywood gussets, or six 16d nails with 2x4s, half into each 2×6 joist. That’s conservative nailing in terms of the capacity of the fasteners, but it also keeps the gussets from twisting.

## How much weight can a 2×4 ceiling joist hold?

1,000 poundsIf there is no strong wind, a 2×4 measuring at least 8 feet can support at least 1,000 pounds vertically.

## What size beam do I need for a 20 span?

In that case, you need something like a 12-16″ GLULAM or LVL to span the 20′ and can use simple 2×8-10 dimensional lumber 16″OC as floor joists.

## How much weight can a 2×6 ceiling joist hold?

Fine Homebuilding notes that 2-inch by 6-inch garage joists will support a weight of up to 50 pounds per square foot. If you overload your garage’s ceiling joists, the ceiling may appear to sag from the strain. While your 2-inch by 6-inch joists can collapse from too much weight, such a scenario is uncommon.

## How far can a 2×6 ceiling joist span without support?

For example, the highlighted cell (below) shows that a 2″ x 6″ Southern Yellow Pine joist, with a grade of #2, and spaced 24″ apart can have a maximum span of 10 feet – 0 inches (10-0), if you are designing your structure to support a plaster ceiling.

## How much weight can a 2×6 support flat?

How much weight can a 2×6 ceiling joist hold? Fine Homebuilding notes that 2-inch by 6-inch garage joists will support a weight of up to 50 pounds per square foot. If you overload your garage’s ceiling joists, the ceiling may appear to sag from the strain.

## What size should ceiling joists be?

Though there is no standard joist size for the ceilings in all buildings, most average homes use ceiling joists in a board size of 2-by-6 inches. The range of joist sizes used in homes varies though, between 2-by-4 inches and 2-by-12 inches.

## Is my attic strong enough for storage?

As long as they are not damaged, the joists should be strong enough to allow you to move around in the attic for an inspection and to provide storage for typical boxed items. … The joists should support your weight, but the space between them almost certainly will not.

## How can I make my attic floor stronger?

If the attic joists are not adequate, one way to strengthen the floor for live loads is to sister the old joists. Sistering is the process of adding a new joist next to each existing joist. In the case of 2×6 joists, you can pair them up with additional 2×6 joists by nailing them together, side by side.